Warning: session_start() [function.session-start]: open(/home/content/92/3414692/tmp/sess_rc7vorfrg0lio8vnc1jliri5h1, O_RDWR) failed: No such file or directory (2) in /home/content/92/3414692/html/SRICONCRETE/wp-content/plugins/custom-contact-forms/classes/class-ccf-form-handler.php on line 587

Warning: session_start() [function.session-start]: Cannot send session cookie - headers already sent by (output started at /home/content/92/3414692/html/SRICONCRETE/wp-content/plugins/custom-contact-forms/classes/class-ccf-form-handler.php:587) in /home/content/92/3414692/html/SRICONCRETE/wp-content/plugins/custom-contact-forms/classes/class-ccf-form-handler.php on line 587

Warning: session_start() [function.session-start]: Cannot send session cache limiter - headers already sent (output started at /home/content/92/3414692/html/SRICONCRETE/wp-content/plugins/custom-contact-forms/classes/class-ccf-form-handler.php:587) in /home/content/92/3414692/html/SRICONCRETE/wp-content/plugins/custom-contact-forms/classes/class-ccf-form-handler.php on line 587
SRI Sealers : SRI Concrete

SRI 25% Acrylic WB

Click here for printable instructions

SRI 25% Acrylic WB

Qualifies for LEED-Credits – Urethane Modified Water-borne Acrylic
Concrete Sealer

DESCRIPTION

  • • 25% solids
  • • Seals and protects
  • • Resists hot tire pickup
  • • Urethane modified for increased abrasion resistance
  • • Non-yellowing protection from the sun
  • • Water-based, non-flammable, & environmentally friendly
  • • Easy to apply & clean-up with water

SURFACE PREPARATION

Surface must be clean & dry. Scrub oil spots with concrete cleaner. We recommend SRI CLEANER DEGREASER. For smooth troweled concrete use SRI ETCH & CLEAN. Pressurewash with water at 3000 psi or more. Allow at least 24 hours to dry. Surface must be free of other coatings, waxes, and paint. Always test a small area to your satisfaction before proceeding.

APPLICATION

Apply at substrate temperatures above 50° F. Apply with sprayer. For exterior concrete, you may use a medium nap roller. For smooth concrete you may use a lamb’s wool applicator or short nap roller and cross roll. Thoroughly saturate surface. Apply at approximately 200 ft2 per gallon on brushed concrete and 300 ft2 per gallon on smooth-troweled concrete. That may vary due to roughness and porosity of surface. Apply additional coats as needed for increased gloss.

DRYING TIME

Allow 4 hours for foot traffic, 72 hours for auto traffic. Do not apply if rain is imminent.

CLEAN UP

Wash with water.
NOTE: Keep from freezing. Store between 40° and 100° F.

CAUTION:

Use with adequate ventilation. Avoid direct contact. Symptoms of exposure are redness and irritation to skin and burning and blurred vision to eyes.

FIRST AID

  • EYES: Flush thoroughly for 15 minutes. Seek medical attention.
  • INHALATION: Wash with soap & water. If irritation persists, seek medical attention.
  • INGESTION: Do not induce vomiting. Call a doctor or poison control immediately.
  • SKIN: Move to fresh air. Consult doctor if breathing difficulty persists.
  • SKIN ABSORPTION No harmful results expected.

 

Ingredients CAS#
Acrylic Trade Secret
Urethane Trade Secret
Water 732-18-5
Dipropylene glycol n-butyl ether 29911-28-2
Dipropylene glycol monomethyl ether 34590-94-8
   
Dot Information Non-Regulated Material

 


Warning: Unknown: open(/home/content/92/3414692/tmp/sess_rc7vorfrg0lio8vnc1jliri5h1, O_RDWR) failed: No such file or directory (2) in Unknown on line 0

Warning: Unknown: Failed to write session data (files). Please verify that the current setting of session.save_path is correct () in Unknown on line 0